Hondachopper.com Technical Library

Carburetor Information
U.S. CB750 Models 1969-1978
...|...Home...|...Garage...|...Carb Info Index...|...

...|...Previous Page...|...Next Page...|...
Boring 77-78 carb pilot jets for pods and open headers - Pg 2

These bits are extremely small so use care! The image directly below shows a bit next to a ballpoint pen to give you an idea.

Spray/poour a small amount of the cutting oil or WD-40 into the milk jug lid, just enough to dip the bit in. Here I have it tipped a bit to form a puddle at the lower edge of the lid (below).

Tape the jets down to the edge of the bench with the bubbler tubes pointing out over the edge (above). The bore is too far in to reach with the bit from the other direction. .

...|...Previous Page...|...Next Page...|...